Red Line Oil 80402 Synthetic High-Performance CV-2 Grease w/ Red Moly, 14 oz

Description

Red Line Oil 80402 Synthetic High-Performance CV-2 Grease w/ Red Moly, 14 oz
PART NUMBER:
80402
BRAND:
Red Line Oil
DESCRIPTION
Synthetic High-Performance CV-2 Grease w/ Red Moly, 14 oz tube
CV-2 GREASE
Outperforms the best conventional or synthetic greases and lubes
Withstands extreme temperature and pressure in wheel bearings, U-joints and high-angle CV Joints
Excellent high-temp stability, extreme-pressure protection and water resistance
Used in a variety of applications with operating temps from -100 Fahrenheit to 500 Fahrenheit
Strong resistance to oxidation and corrosion, low evaporation and oil separation with a minimum effect on rubber seals
Contains an organic moly for chassis lubrication and high temp/high speed industrial equipment
Synthetic fluidity allows increases in bearing life up to 200%
Will darken after high-temp use-not detrimental to performance
Product Details
These fluids are offered in a variety of packaging for convenience in different work environments
Used by many of the best engine builders, engineers, and technicians in Formula 1, GP2, Formula 3, NASCAR, NHRA, and WRC
OEM Compatability
Lubricant
4-Ball Wear (ASTM D-417B)
Load/Wear Index (ASTM D-2783)
Red Line CV-2
0.46
71.1
Syn Grease - M
0.50
41.9
Syn Moly Grease-A
0.78
38.4
GM Wheel Bearing Grease
0.71
36.6
Lubricant 4-Ball Weld Drop Point
(ASTM D-2783)
Red Line CV-2 400 Kg >800 Fahrenheit
Syn Grease - M 2 200 Kg 485 Fahrenheit
Syn Moly Grease - A 315 Kg 515 Fahrenheit
GM Wheel Bearing Grease 250 Kg 525 Fahrenheit
PROPERTY CV-2 GREASE
NLGI Grade #2
NLGI Service GC-LB
Thickener Non-Soap
Fluid Type Thermally-stable synthetic
Useful Temperature Range -100 Fahrenheit to 500 Fahrenheit
Color Red
Dropping Point, >800 Fahrenheit
Load Wear Index 71.2
4-Ball Wear Scar Diameter (Red), 40 Kg 0.46 mm
Water Washout at 105 Fahrenheit 1%
Evaporation Loss, 22 hrs at 350 Fahrenheit 4%
Oil Separation, 30 hrs at 350 Fahrenheit 5%
Oxidation Stability, 500 hrs at 210 Fahrenheit, psi 12
Rust Test, ASTM D1743 Pass
Red Line CV-2 Grease is designed to withstand the extreme temperatures and pressures which occur in high-performance wheel bearings and CV-joints. The excellent high temperature stability, extreme-pressure protection and water resistance enables it to out-perform even the best conventional or synthetic greases.
Red Line CV-2 Grease can be used in a wide range of applications at temperatures ranging between -100 Fahrenheit to 500 Fahrenheit and provides good oxidation and corrosion resistance, low evaporation and oil separation, and has a minimum effect on rubber seals. The exceptional extreme-pressure performance and the fluidity of the synthetic oil allows increases in bearing life of 200% to 800%.
Red Line CV-2 Grease contains a red moly compound which is a superior lubricant to black moly disulfide lubricants.
Red Line CV-2 Grease may also be used in industrial applications such as high-temperature alternator bearings, high-speed ball bearings, conveyor bearings, worm gear drives, servo mechanisms and applications where vibrations can cause fretting wear and corrosion to take place.
Red Line CV-2 Grease will retain its consistency and extreme-pressure performance under high-temperature and high-shear conditions for extended periods, which extends the performance ranges of the lubricated components.
Red Line CV-2 will slightly darken after high-temperature use; this darkening will not detrimentally effect the performance of the grease.
Although Red Line CV-2 is compatible with small amounts of many petroleum-based greases, it is always good lubrication practice to thoroughly clean out the old grease to eliminate abrasive particles and to minimize the possibility of grease incompatibility.